Alamo Interstater FC-FL-0001 - Manual (Page 127)

OPERATION
INTERSTATER 03/09 Operation Section 4-17
© 2009 Alamo Group Inc.
OPERA
T
ION
• Check that the main driveline securely
attached to the tractor and the locking collar is
seated in the groove of the PTO Shaft.
• Ensure wing hydraulics are secure at both
ends.
• Ensure the mower hitch is securely attached
to the tractor drawbar with a proper size bolt
and secured nut.
• Ensure that a properly rated safety tow chain
is equipped securing the mower to the tractor.
OPS-F- 0003
• Ensure rubber deflectors are in position and not
damaged. Replace worn, broken, and missing
sections immediately.
• Ensure the rollers are in good condition and
rotate freely.
• Ensure the driveline integral shield is in good
condition and rotate freely.
• Inspect that all bolts and screws are in position
and are properly torqued. OPS-F- 0004
• Inspect the condition of the wings and rear
section drive belts.
• Ensure the slip clutch (rear mower section only)
is properly adjusted and the friction plates are
not frozen together. Reference the
Maintenance Section for proper slip clutch
maintenance.
• Ensure the slip clutch shield and drive belts
shields are in place and in good repair.
• Ensure the tractor PTO master shield is in
place, lowered and in good condition.
OPS-F- 0005