Sper Scientific 840052 Data Acquisition Software - Manual (Page 9)

SAVE FILE
Look in:
File name:
File of type:
8711.txt
8721.txt
ph1116.txt
1. To save a file, clicking " Save File " on the menu bar or press
Alt+F.You will see Diagram G.
2. You can save the recorded data with a new name by editing
a new name in file name block.
3. After saving the file, more statistics or analysis can be done
with other programs.
Diagram G
COM. PORT SETTING
7
Click "Com. Port" on the menu bar, or press Alt + C
simultaneously to enter Com. Port setting. (See Diagram G-1)
Set up RS232 port,Baud rate, Data bits, Parity and Stop bits. See
Page 12 to 22 for the details of each meter.
Generally it is COM1 for PC, others depend on your computer
settings. It is up to COM4 in this program.
Click "OK" to save the setting or "CANCEL" to exit without saving.