Ridetech 41260000 - Manual (Page 4)

12. The other end of the bar will
attach to the top of the package tray.
Drop four 3/8” x 1 ¼” bolts with flat
washers down through the package
tray.
9. The next bar to be installed is the
package tray bar.
10. Before installing the bar, use the
template on page 7 to drill four holes
in the top of the package tray for the
bar flange to bolt to.
11. Fasten the clamp to the main
hoop with the tab facing rearward.
Use clamp D on the driver side and
clamp P on the passenger side.
13. The lip around this opening in the
package tray will interfere with the
trunk bar bracket. The lip can be cut
with a die grinder and flattened with a
pair of pliers.