Ridetech 11066699 - Manual

350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Part # 11066699
59-64 Chevy Impala Rear Upper Strong Arm & Panhard Bar Kit
Components:
1 90001119 Upper control arm
– (set at 13.75”)
1 90001589 Kevlar lined Heim end – 5/8” I.D.
1 90001085 Poly bushing half – 1.5” O.D. x 1.5” long
1 90001086 Poly bushing half
– 1.5” O.D. x 1” long
1 90000467 Bushing sleeve – 2.5” long
2 90002066 Aluminum bearing spacer
1 90000993 Panhard bar
1 90001942 Rubber bushing
– pressed into panhard bar
1 90001946 Panhard Kevlar lined Heim end
– 3/4" I.D.
2 90000460 Aluminum T bushing – for heim end
1 90000461 Panhard bar stud
Hardware:
2 99603003 5/8
” USS flat washer
Panhard bar stud
1 99563001 9/16
” USS flat washer
Panhard bar stud
1 99561001 9/16” x 2 ½” SAE Gr.8 bolt Panhard bar to frame
2 99562001
9/16” SAE Nylok nut
Panhard bar
2 99752004 3/4"-16 Jam nut Heim ends
2 99621005 5/8” x 3 ½” SAE Gr.8 bolt Upper arm
3 99622006
5/8” SAE Nylok jam nut
Upper arm / Pan hard bar stud