Ridetech 11441499 - Manual (Page 3)

5. Install the new tubular lower control arm. This new
arm provides mounting locations for the airspring, shock
absorber, bumpstop, and OEM swaybar. Install the
bumpstop in the threaded hole provided in the control
arm tube.
6. Install the airline
fitting into the airspring
then bolt the upper cup
to the top of the
airspring. Install the
threaded rod that will
hold the upper airspring
cup into the coilspring
pocket. 7. Insert the airline
through the top of the
coilspring pocket and
connect to the airspring.
Install the assembly into
the coilspring pocket
with the threaded rod
going into the oem
shock hole. Use the
provided washers and
nylock nut to secure this
upper mount. 8. Swing the lower control arm up
into position and attach the
balljoint and swaybar. [Install
swaybar bolt with the head down
for best ground clearance]. Attach
the airspring to the lower control
arm with the provided bolts.
Examine the assembly to ensure
the airspring will NOT contact
ANYTHING during the entire
suspension travel.