Ridetech 11389100 - Manual (Page 2)

Installation Instructions
Notes:
This sway bar is designed for use with lower StrongArms.
The posilinks are not sold in this kit they are included with are lower StrongArms system.
2. Bolt the PosiLink to the between the
bar and lower arm. The T bushing will be
installed between the PosiLink and the
sway bar. 7/16” flat washer will be used
at the other connection points.
3. Tighten the frame bolts.
4. Check clearance through full
suspension through full suspension travel.
Make sure the PosiLinks do not bind.
Sway bar
Control Arm Tab
1. Apply lubricant to the poly bushing and
slide it over the sway bar. Using the
frame brackets supplied bolt the sway bar
to the frame. Do not tighten the bolts yet.