Ridetech 11010999 - Manual (Page 3)

7. Bolt the bottom of the air spring to the
lower StrongArm using a 3/8” x ¾” bolt,
flat washer and lock washer.
8. Double check air spring clearance
through full suspension travel. If any
part of the air spring touches the frame
at anytime it will damage the unit. This
is not a warrantable situation.
9. The driving height of the car is
determined by the height of the air
spring. This air spring should be
approximately 5.5” tall at ride height.
This may vary slightly to driver
preference.