Ridetech 11396799 - Manual (Page 3)

8. Install upper airspring/shock
crossmember. This
crossmember will be located by
the OEM upper shock brackets.
You will also need to drill 2
additional mounting hole in each
framerail, using the
crossmember as a template, to
complete the installation.
9. This is a close up view of the
upper airspring/shock
crossmember installation.
10. Install the upper
control arm frame mount
onto the gas tank
crossmember. This is a 2
piece mount that is bolted
around the tank
crossmember and is
located via the bungs on
the inside of the bracket
that are inserted into
existing holes in the tank
crossmember. The
threaded holes are used
locate bolts that prevent
the bracket assembly from
rocking on the
crossmember. The
bracket can be welded as
an alternative.