AMX NetLinx Integrated Controllers NI-700/900 - Manual (Page 5)

Introduction
1 NI-700 & NI-900 Hardware Reference Guide
Introduction
NI-700 Overview
The NI-700 NetLinx Integrated Master Controller can be programmed to control RS-232/422/485, IR/
Serial, and Input/Output devices through the use of both the NetLinx programming language and the
NetLinx Studio application (version 2.4 or higher). Another key feature of this product is the ability to
easily access the configuration switches without having to remove a cover plate.
NI-700 Specifications
The front LEDs (FIG. 1) are grouped by control type and are labeled according to their corresponding
port (connector) numbers on the rear of the unit.
NetLinx Integrated Master Controller Features
NI-700
(FG2105-70) • 1 RS-232 Program port
• 2 RS-232/RS-422/RS-485 ports
• 1 IR/Serial Output ports
• 4 Digital Input/Output ports
• 1 IR RX (receive) port (works only with AMX IR Receivers)
When working with the NI-700 Integrated Controller, verify you are using the latest
version of NetLinx Studio v 2.4 or higher (available for download from
www.amx.com).
FIG. 1 NI-700 NetLinx Integrated Controller
Front
Program
port
Configuration
DIP switch
IR LED (red)
I/O LEDs (yellow)
Link/Active-Status-Output-Input
(green/red/yellow)
Serial RS-232/422/485 TX/RX LEDs (red/yellow)
Rear
IR RX LED (red) ID Pushbutton
RS-232/422/485 (Ports 1 & 2)
Ethernet
Power
IR RX I/O IR/Serial
(Port 5) (Port 3) (Port 4)
AXlink port/LED