JELD-WEN JII022 Custom and Premium Pocket Windows User Manual
Page 6
INSTALLATION INSTRUCTIONS
for Custom and Premium Pocket Windows (JII022)
6
Please visit jeld-wen.com for warranty, finishing instructions and care
and maintenance information.
Thank you for choosing
COMPLETE INSTALLATION - CONTINUED
4
Exterior Installation:
Seal the interior
joint between the
existing frame and
the replacement
window with 100%
polyurethane sealant.
Interior Installation:
Skip this step.
Both Installs/Exterior View
Wood
trim
Joints
to be
sealed
Weep
gap
Sill
Clad cover
strip
Seal
interior
joint
Exterior Install ONLY/Interior View
Exterior/Interior
Installation:
Use 100% clear
silicone sealant
(color matched
polyurethane sealant
may be used on
metal clad), to seal
the exterior joints.
Seal any metal-
to-metal cladding
joints if applicable.
Do not seal the 1/8"
weep gap on the sill
ends. When sealing
between the existing
sill and the sill
adapter on a wood product, leave 1" weep gaps on both ends.
AFTER INSTALLATION
Finish any exposed wood surfaces. Metal-clad aluminum does not
require additional finishing.
©2014 JELD-WEN, inc.; This publication and its contents are owned by JELD-WEN, inc. and are protected under the U.S. Copyright Act and other intellectual property laws. All trademarks, service marks,
logos and the like (whether registered or unregistered) are owned or controlled by JELD-WEN, inc. or others. Unauthorized use or duplication of JELD-WEN intellectual property is prohibited.
JELD-WEN reserves the right to change product specifications without notice. Please check our website, jeld-wen.com, for current information.
(05/14)