Equus 3040 - OBD2 ScanTool - Manual (Page 42)

Additional Functions
ADJUSTMENTS AND SETTINGS
40 OBD2
2.
Press the DOWN button to increase the brightness of the display
(make the display lighter). When the maximum brightness setting is
reached and the DOWN button is pressed, the display returns to
the minimum brightness setting.
3.
When the desired brightness is obtained, press the LD/ENTER
button to save your changes and return to the Setup Menu.
Enabling the Audible Tone
1.
Use the DOWN
button to highlight
Audible Tone in the Setup Menu, then
press the LD/ENTER
button.
„ The AUDIBLE TONE screen displays.
2.
Press the DOWN button to highlight
ON of OFF as desired.
3.
When the desired option is selected,
press the LD/ENTER button to save
your changes and return to the Setup
Menu.
Setting the Unit of Measurement
1.
Use the DOWN to highlight Unit of
Measurement in the Setup Menu, then
press the LD/ENTER
button.
„ The SELECT UNIT screen displays.
„ The currently selected unit of
measurement is highlighted.
2.
Press the DOWN button, as necessary,
to highlight the desired unit of measure-
ment.
3.
When the desired unit of measurement
value is selected, press the LD/ENTER
button to save your changes and return to
the Setup Menu.
Exiting the MENU Mode
1.
Use the DOWN buttons to highlight Menu Exit in the Setup Menu,
then press the LD/ENTER button.
„ The display returns to the Mode Selection Menu.