Equus 3040 - OBD2 ScanTool - Manual (Page 38)

Additional Functions
VIEWING VEHICLE INFORMATION
36 OBD2
Viewing Available Modules
The Scan Tool can retrieve a list of modules supported by the vehicle
under test.
1. With the Scan Tool in “Live Data” mode (see VIEWING LIVE DATA
on page 32 for details), press and hold the LD/ENTER button
until the “Mode Selection Menu” appears.
2. Use the DOWN button to highlight
Vehicle Information, then press the
LD/ENTER
button.
„ The Vehicle Information menu displays.
3. Use the DOWN button to highlight
Available Modules, then press the
LD/ENTER
button.
4. A "One moment please..." message
displays while the requested information
is retrieved from the vehicle's computer.
5. When the retrieval process is completed,
a complete list of modules supported by
the vehicle under test is shown on the
Scan Tool’s display. Use the DOWN
button to view the entire list.
6. When you have finished viewing the list
of available modules, press the
LD/ENTER
button to exit.
Viewing In-use Performance Tracking (IPT)
The Scan Tool can retrieve In-use Performance Tracking (IPT) statistics
for monitors supported by the vehicle under test. Two values are
returned for each monitor; the number of times that all conditions
necessary for a specific monitor to detect a malfunction have been
encountered (XXXCOND), and the number of times that the vehicle has
been operated under the specific conditions for the monitor (XXXCOMP).
Statistics are also provided for the number of times the vehicle has been
operated in OBD monitoring conditions (OBDCOND), and the number of
times the vehicle’s engine has been started (IGNCNTR).
1. With the Scan Tool in “Live Data” mode (see VIEWING LIVE DATA
on page 32 for details), press and hold the LD/ENTER button
until the “Mode Selection Menu” appears.
2. Use the DOWN button to highlight
Vehicle Information, then press the
LD/ENTER
button.
„ The Vehicle Information menu displays.