beautypg.com

Adjustments and settings, Additional functions, 38 obd2 – Equus 3040 - OBD2 ScanTool User Manual

Page 40

background image

Additional Functions

ADJUSTMENTS AND SETTINGS

38 OBD2

For example, O2S12 or O2SB1S2 is the designation for the downstream
O2 sensor for cylinder bank 1.

The Scan Tool does not perform O2 sensor tests, but retrieves
results from the most recently performed O2 sensor tests from the
on-board computer's memory. You may retrieve O2 sensor test
results for only one test of one sensor at any given time.

1.

With the Scan Tool in “Live Data” mode

(see VIEWING LIVE DATA on page 32
for details), press and hold the
LD/ENTER

button until the “Mode

Selection Menu” appears.

2.

Use the DOWN button to highlight O2

Sensor Test, then press the LD/ENTER

button.

3.

A "One moment please..." message

displays while the request is sent to the
vehicle's on-board computer.

„

The "Select Sensor" screen displays.
The screen shows all O2 sensors
applicable to the vehicle under test.

If O2 sensor tests are not
supported by the vehicle under test,
an advisory message shows on the
Scan Tool’s display. Press the
LD/ENTER

button to return to

the “Mode Selection Menu.”

4.

Use the DOWN button, as necessary, to highlight the O2 sensor for

which you wish to view test results, then press the LD/ENTER

button.

5.

When test results have been retrieved,

data for the selected sensor test will
show on the Scan Tool’s display.

6.

When you have finished viewing the

retrieved test data, scroll to the end of
the display to select Exit, then press the
LD/ENTER

button to return to the

"Select Test" screen.

ADJUSTMENTS AND SETTINGS

You can access the Adjustments and Settings
MENU while the Scan Tool is in “Live Data”
mode. The Scan Tool lets you make several
adjustments and settings to configure the Scan
Tool for your particular needs. The following
adjustments and settings are available:

„

Select Language: Sets the display language for the Scan Tool to
English, French or Spanish.