Equus 3040 - OBD2 ScanTool - Manual (Page 41)

Additional Functions
ADJUSTMENTS AND SETTINGS
OBD2 39
„ Adjust Brightness: Adjusts the brightness of the display screen.
„ Audible Tone: Turns the Diagnostic Tool’s audible tone “on” and
“off.” When turned “on,” a tone sounds each time a button is pressed.
„ Unit of Measurement: Sets the Unit of Measurement for the Scan
Tool’s display to USA or metric.
Accessing the Adjustments and Settings Menu
1.
With the Scan Tool in “Live Data” mode
(see VIEWING LIVE DATA on page 32
for details), press and hold the
LD/ENTER
button until the “Mode
Selection Menu” appears.
2.
Use the DOWN
button to highlight
Tool Setting, then press the LD/ENTER
button.
„ The Adjustments and Settings MENU
displays.
Selecting the Display Language
1.
Use the DOWN
button to highlight
Select Language in the Setup Menu,
then press the LD/ENTER
button.
„ The LANGUAGE screen displays.
„ The currently selected display Lan-
guage is highlighted.
2.
Press the DOWN button, as necessary,
to highlight the desired display language.
3.
When the desired display language is
highlighted, press the LD/ENTER
button to save your changes and return
to the Setup Menu (shown in the
selected display language).
Adjusting Display Brightness
1.
Use the DOWN
button to highlight
Adjust Brightness in the Setup Menu,
then press the LD/ENTER
button.
„ The BRIGHTNESS screen displays.
„ The BRIGHTNESS field shows the
current brightness setting, from 1 - 8.