Equus 3040 - OBD2 ScanTool - Manual (Page 36)

Live Data Mode
CUSTOMIZING LIVE DATA
34 OBD2
„ To deselect a currently selected PID, highlight the PID, then
press the LD/ENTER
button. The checkmark will be removed
from the checkbox.
4.
When you are finished making your selection(s), scroll to the end of
the PID list and highlight the word DONE, then press the LD/ENTER
button.
„ The Scan Tool is now in "Custom Live Data" mode. Only the
PIDs you selected are shown on the Scan Tool’s display.
„ To toggle between the "Custom Live Data" display and the full
Live Data display, momentarily press the LD/ENTER
button.
5.
To exit the "Custom Live Data" mode, press and hold the
LD/ENTER button until the “Mode Selection Menu” displays.