Caution – EOTech Holographic Hybrid Sight I EXPS3-4 with G33.STS Magnifier User Manual
Page 5
CAUTION
• Never disassemble the sight’s optical assembly. The optical cavity is purged, nitrogen
filled, and sealed to achieve fog proof performance. Disassembly will void the warranty and
render the sight inoperable.
• When using a Night Vision compatible HWS® in tandem with an NV device, always check
to make sure the sight is off before pressing the NV button to turn on the sight in the Night
Vision mode. Otherwise, it will toggle to the Normal mode and saturate the image intensi-
fier.
• When a sudden increase in resistance is felt in the elevation or windage adjustment shafts,
the end of the adjustment range has been reached. DO NOT TURN THE ADJUSTMENTS ANY
FARTHER OR SERIOUS DAMAGE MAY OCCUR TO THE SIGHT.
• Never clean the glass surface with a dry cloth or paper towel; always dampen the glass
surfaces prior to cleaning.
• All moving parts of the sight are permanently lubricated with the exception of the quick
release lever. If audible sounds are generated when opening/closing lever, add a drop of
lubricant to lever assembly. Do not try to lubricate any other moving part.
- EXPS3 EXPS3 Holographic Weapon Sight (Black, Ring/Double Dot Reticle) Model EXPS2 Holographic Weapon Sight (Red Circle-Dot Reticle) Model EXPS2 Holographic Weapon Sight (Green Circle-Dot Reticle) Model XPS2 Holographic Weapon Sight (Ring with Single Red Dot Reticle, Gray) XPS2-Z XPS3 XPS2 300 Blackout Holographic Hybrid Sight II EXPS2-2 with G33.STS Magnifier EXPS2