Warning – EOTech Holographic Hybrid Sight I EXPS3-4 with G33.STS Magnifier User Manual
Page 3
WARNING
WEAPON SAFETY: Prior to mounting the HWS® on your weapon, be sure the weapon is
cleared. If you are not sure how to clear your weapon, please see the accompanying
operator’s manual for the weapon platform you are mounting the sight on.
LASER SAFETY: The HWS® is a Class II laser product. The Class II level illuminating beam,
however, is completely blocked by the housing. The only laser light accessible to the eye is
the image beam and is at a power level within the limit of a Class IIa laser product. The
illuminating beam can become accessible to the eye if the housing is broken. Turn the sight
off immediately and return the broken unit to the factory for repair.
FCC COMPLIANCE: The HWS® complies with Part 15 of the FCC Rules. Operation is subject
to the following conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause unde-
sired operation. Complies with 21 CFR Chapter 1, Subchapter J.
- EXPS3 EXPS3 Holographic Weapon Sight (Black, Ring/Double Dot Reticle) Model EXPS2 Holographic Weapon Sight (Red Circle-Dot Reticle) Model EXPS2 Holographic Weapon Sight (Green Circle-Dot Reticle) Model XPS2 Holographic Weapon Sight (Ring with Single Red Dot Reticle, Gray) XPS2-Z XPS3 XPS2 300 Blackout Holographic Hybrid Sight II EXPS2-2 with G33.STS Magnifier EXPS2