Clinton Electronics CE-M24S - Manual (Page 10)

10
Change SD-Card Image/Video/Audio
• Insert the SD-Card into your computer or SD-Card reader.
• Move the desired JPEG image, or AVI video file into the SD-Card folder.
(The required full screen image size is 1024x786)
• Leaving multiple media files on the SD-Card will result in the device cycling through all loaded media.
• Insert the SD-Card back into the PVM with the contacts facing out, as shown on the right- DO NOT
FORCE IT IN.
• WHEN SD-CARD IS INSERTED, YOU MUST POWER CYCLE THE UNIT. You can do this by pushing
the power button on the remote control, or by unplugging the power cord from the wall.
• If you choose to display SD-Card content, an SD-Card MUST be inserted, or you will see a
“Settings” Menu.
POWER AUTO UP DOWN MENU
POWER AUTO UP DOWN MENU
When an SD-Card is inserted, you
must power cycle the unit by pushing
the power button on the remote, or
unplugging the power from the wall.