Clinton Electronics NXHD OSD - Manual (Page 21)

0 1 6
Clinton Electronics Corp. NXHD User Manual
SPECIAL
1) Position the selected area to the desired location, then press SET.
2) Adjust the size of the area, then press SET.
3) Once you have the desired location and size of the PRIVACY area,
choose ‘RET’ (Return) to apply changes. Choose ‘AGAIN’ to start
over to make any needed adjustments to the area.
• COLOR : Select from 16 different colors.
• TRANS. : Adjust the transparency of the color.
• DEFAULT : Restores default PRIVACY settings..
► PRIVACY
Apply a mask to an area you want to hide. Useful in areas where a camera
can see into areas that are not relevant to security needs.
• SELECT : Select up to 8 privacy areas, the selected area will
be flash and be displayed with a thin white outline.
• DISPLAY : Choose to have the selected privacy area be shown
in COLOR, MOSAIC or INV (Inverted). Position and
size of the privacy area are adjustable upon entering
the submenu.
PRIVACY
SELECT
DISPLAY
COLOR
TRANS.
DEFAULT
RETURN
1.
2.
3.
4.
5.
6.
AREA1
COLOR
2
3
RET