Airlink101 AR660W3G - Manual (Page 21)

22
Click OK to save the settings.
WEP
Enter the settings below:
• Key Length: Select 64-bit or 128-bit
• Key Format: Select ASCII or Hex
• Default Tx Key: Select Key 1
• Encryption Key 1: If you selected 64-bit key length and ASCII key format, enter 5
alphanumeric characters. If you selected 128-bit key length and ASCII key format, enter
13 alphanumeric characters. If you selected 64-bit key length and HEX key format, enter
10 hexadecimal characters (0~9, A~F) for Key Setting. If you selected 128-bit key length
and HEX key format, enter 26 hexadecimal characters. This is the security key for your
wireless network.
Click on OK to save and activate all the settings. Now, you can start to use the router as your
internet gateway.
Note: It is suggested to write down the security settings (Encryption and Key) you
configured for the Router on a piece of paper and keep it in a safe place.
Step 8 Click Apply to restart the router.