Airlink101 AR660W3G User Manual
Page 14
15
DSL
For DSL users, your Internet type is either Dynamic IP or PPPoE. If you are not sure which one
you have, it is suggested to select PPPoE xDSL for your WAN type, and if you cannot connect
to the Internet after the Setup Wizard finished, go through the Setup Wizard again and select
Cable Modem. Otherwise, you can call your ISP to confirm which Internet type you have.
Option 1: PPPoE Settings
Click on PPPoE xDSL for your WAN type. Enter your user name and password provided by
your ISP. Click NEXT.
Note: Depending on the ISP, you may need to include the domain name with your username.
Example:
Parameter
Description
User Name
Please input user name assigned by your Internet service
provider here.
Password
Please input the password assigned by your Internet service
provider here.
Service Name
Please give a name to this Internet service (this is optional).
MTU
Please input the MTU value of your network connection here. If
you don’t know, you can use default value.
Connection Type
Please select the connection type you wish to use. There are 3
options:
1) ‘Continuous’ - keep internet connection alive, do not
disconnect,