Airlink101 AR660W3G - Manual (Page 16)

17
PPTP
PPTP xDSL requires two kinds of setting: WAN interface setting (setup IP address) and PPTP
setting (PPTP user name and password).
Here we start from WAN interface setting:
Select the type of how you obtain IP address from your service provider here. You can choose
“Obtain an IP address automatically” (equal to DHCP, please refer to „Cable Modem section
above), or “Use the following IP address” (i.e. static IP address).
WAN interface settings must be correctly set, or the Internet connection will fail even those
settings of PPTP settings are correct. Please contact your Internet service provider if you don’t
know what you should fill in these fields.
Now please go to PPTP settings section:
Parameter Description
User Name
Please input user name assigned by your Internet service
provider here.
Password
Please input the password assigned by your Internet service
provider here.