AirSep MN118-1 B - Manual (Page 30)

MN118-1 rev B
02/14
25
6.4 Tool Kit and Pressure Test Gauge
The tools needed for you to properly service the NewLife Intensity unit are listed
below:
Multi-adjustable pliers, wire cutters, needle-nose pliers, slotted-head screwdriver, Phillips-
head screwdriver, ratchet, adjustable wrench, 1-inch deep well socket, 9/16-inch socket, 2-
inch extension, 7/16-inch combination wrench, 9/16-inch combination wrench, and 5/8-
inch combination wrench.
Pressure test adapter (AirSep p/n: KI057-1).
Outlet pressure test kit (AirSep p/n: TU131-1).
A pressure test gauge (AirSep p/n: KI036-1) to read operating system pressures and outlet
pressures on the Intensity unit should be kept available at all times.