Asus NCLV-D - Manual (Page 53)

A S U S N C L V - D S e r i e s A S U S N C L V - D S e r i e s A S U S N C L V - D S e r i e s A S U S N C L V - D S e r i e s A S U S N C L V - D S e r i e s 2 - 3 3 2 - 3 3 2 - 3 3 2 - 3 3 2 - 3 3
NCLV-DS
NCLV-DS Onboard SCSI connector
35
68 34
1
SCSI1
68-Pin Ultra320/
Ultra2-Wide SCSI Connector
5 . 5 . 5 . 5 . 5 . S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 ) S C S I c o n n e c t o r ( 6 8 - p i n S C S I 1 )
This 68-pin Ultra160/320 SCSI connector supports a maximum of 15
devices as specified by the Ultra160/320 standards.
• The SCSI connector is available with the NCLV-DS model only.
• The onboard SCSI chipset incorporates an advanced multi-mode I/O
cell that supports both single-ended (SE), Ultra2, and Ultra160/320
devices. With Ultra160/320 devices, the SCSI bus platform performs
at full Ultra160/320 speeds (up to 160MB/s or 320MB/s) and
extended cabling of 12m (or 25m in a point-to-point configuration).
When an SE device is attached, the bus defaults to an SE speed and
1.5m cable length.