Asus NCLV-D - Manual (Page 37)

A S U S N C L V - D S e r i e s A S U S N C L V - D S e r i e s A S U S N C L V - D S e r i e s A S U S N C L V - D S e r i e s A S U S N C L V - D S e r i e s 2 - 1 7 2 - 1 7 2 - 1 7 2 - 1 7 2 - 1 7
Do not forget to connect the
CPU fan connector! Hardware
monitoring errors may occur if
you fail to plug this connector.
2. Use a Phillips screwdriver to
tighten the four heatsink screws
in a diagonal sequence.
3. Connect the fan cable to the
4-pin connector labeled
CPU_FAN1.
4. Repeat steps 1 to 3 to install
the other heatsink if you have
installed a second CPU, then
connect the fan cable to the
4-pin connector labeled
CPU_FAN2.
The heatsinks appear as shown
when installed.
Make sure that the C P U f a n C P U f a n C P U f a n C P U f a n C P U f a n
p i n s e l e c t i o n p i n s e l e c t i o n p i n s e l e c t i o n p i n s e l e c t i o n p i n s e l e c t i o n jumper is set
accordingly. See page 2-24
for details.