Asus Maximus IV Extreme - Manual (Page 99)

ASUS Maximus IV Extreme 3-7
Maximum Turbo Ratio setting (Adjustable in OS) [Auto]
This item only appears when you set Turbo Ratio to [All Cores mode (Adjustable
in OS)].
1/2/3/4-Core Ratio Limit [Auto]
This item appears only when you set Turbo Ration to [By Number of Active Cores
Mode].
Use the <+> and <-> keys to adjust the value.
[Auto]
Using the factory-configured value.
1-Core Ratio Limit value must be higher than or equal to 2-Core Ratio Limit if it
is not set to [Auto]
Memory Frequency [Auto]
Allows you to set the memory operating frequency. The configuration options vary
with the BCLK/PEG Frequency item settings.
Selecting a very high memory frequency may cause the system to become
unstable! If this happens, revert to the default setting.
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]
DRAM Timing Control
The sub-items in this menu allow you to set the DRAM timing control features. Use
the <+> and <-> keys to adjust the value. To restore the default setting, type [auto]
using the keyboard and press the key.
Changing the values in this menu may cause the system to become unstable! If
this happens, revert to the default settings.
GPU.DIMM Post
The sub-items in this menu display the status of the installed VGA cards and
memory. The field shows N/A if there’s no device installed on that slot.
CPU Performance Settings
The sub-items in this menu allow you to set the CPU ratio and features.
CPU Ratio [Auto]
Allows you to manually adjust the maximum non-turbo CPU ratio. Use <+> and
<-> keys to adjust the value. The valid value ranges vary according to your CPU
model.