beautypg.com

Iii. hardware setup – Asus P5-99VM User Manual

Page 33

background image

ASUS P5-99VM User’s Manual

33

III. HARDWARE SETUP

Connectors

III. H/W SETUP

24. CPU/Chassis Cooling Fan Connectors (FAN, 3 pins)

These connectors support 3-pin cooling fans of 500mA (6W) or less with a mini-
mum of 3,500RPM. Orientate the fans so that the heatsink fins allow airflow to
go across the onboard heatsink(s) instead of the expansion slots. Depending on
the fan manufacturer, the wiring and plug may be different. The red wire should
be positive, while the black should be ground. Connect the fan’s plug to the
board taking into consideration the polarity of the connector. NOTE: The “Ro-
tation” signal is to be used only by a specially designed fan with rotation
signal. The Rotations per Minute (RPM) can be monitored using ASUS PC
Probe Utility.

WARNING!

The CPU and/or motherboard will overheat if there is no airflow

across the CPU. Damage may occur to the motherboard and/or the CPU fan if
these pins are incorrectly used. These are not jumpers, thus, do not place
jumper caps over these pins.

P5-99VM 12-Volt Cooling Fan Power

GND

Rotation

+12V

GND

Rotation

+12V

CPU Fan Power

Chassis Fan Power

0

1