Iii. hardware setup, Connectors iii. h/w setup – Asus P5-99VM User Manual
Page 32
32
ASUS P5-99VM User’s Manual
III. HARDWARE SETUP
21. Wake-on-LAN Activity Connector (3-pin WOLCON)
The WOLCON connector allows the system to power up when there is a wakeup
packet or signal is received from the network through the ASUS PCI-L101 LAN
card (see ASUS LAN CARD).
IMPORTANT: This feature requires that the WAKE On LAN Power Up Control is
set to Enabled (see Power Management Setup under BIOS SOFTWARE) and that
your system has an ATX power supply with at least 720mA +5V standby power.
P5-99VM Wake-On-LAN Connector
IMPORTANT: Requires an ATX power
supply with at least 720mA +5-volt
standby power
0
1
+5 Volt Standby
PME
Ground
22. Stereo Audio In Connector (4-pin CD_IN) /
23. MODEM Card Voice In Connector (4-pin MODEM)
(with optional onboard audio)
CD_IN allows you to receive stereo audio input from an internal CD-ROM
drive or other sound sources, such as a TV tuner or MPEG card. MODEM al-
lows mono inoput and output for a compatible voice modem microphone and
speaker interface.
P5-99VM Stereo Audio In / Modem Card Voice In Connectors
CD_IN
Ground
Ground
0
1
Left Audio Channel
Right Audio Channel
Modem-In
Ground
Modem-Out
Ground
Connectors
III. H/W SETUP