GE 45145 GE Choice Alert Wireless Panic Button - Manual (Page 13)

12 13
WARNING!
Risk of personal injury
- Prolonged exposure to alarm siren may cause permanent hearing loss
Battery Warnings!
- Remove batteries before storing the Alarm or Sensor for
extended periods
- Batteries may leak harmful liquids or ignitable materials or explode
causing injury and product damage
- Do not mix old and new or other battery types
- Replace all batteries at the same time
- Replace fully discharged batteries immediately
Panic Button F.A.Q.’S
Q. I bought a Panic Button and the Control Center will not
recognize it. Why?
A. First, make sure that the battery is new and has been
correctly positioned (matching polarity). Confirm that the
Panic Button has been correctly assigned to a device
number on the Control Center.
Q. If I put the Panic Button on Zone 4 will it still set off
the alarm?
A. The Panic Button is assigned to a device number instead
of a zone. It will sound the alarm when assigned to any of
the four device numbers.
Q. I’ve tried several times to erase a Panic Button from the
device number memory but it still remains - What
can I do?
A. If you are unable to completely erase a Panic Button from
the device number memory, you may have an older, early
production Control Center. Early production versions only
allowed for replacement of one remote transmitter with
another. Contact Tech Support at 800-654-8483 for
any questions.