HP Deskjet 400 Printer - Manual (Page 8)

Changing Print Cartridges
The HP DeskJet 400 series printer takes any one of the
following print cartridges at a time: black print cartridge
(HP part no. 51626A) or color print cartridge (HP part
no. 51625A). See your local HP dealer or office supply
store to purchase the color print cartridge.
1. Open the printer door.
2. Press the Change Cartridge button ( ) to move
the print cartridge holder to the middle position.
3. Remove the print cartridge by pulling it by its
green top.
4. To install another print cartridge, follow steps 4
through 8 on page 3.
Using the Print Cartridge
Storage Container
You can use either the black print cartridge supplied
with the printer (HP part no. 51626A), or you can use
the color print cartridge purchased separately (HP part
no. 51625A). However, you can only use one of these
print cartridges in the printer at one time.
Note: Always store the print cartridge that is not
currently being used in the storage container.
The storage container protects the ink
nozzles from damage and prevents the ink
from drying out while the print cartridge is
not in use. This prolongs the life of the print
cartridge, protecting your investment.
1. To store the color print
cartridge, make sure the
arrow on the top of the
color print cartridge
points toward the
cartridge clip at the back
of the storage container.
2. To store the black print
cartridge, make sure the
arrow on the top of the
black print cartridge
points toward the
cartridge clip on the left
of the storage container.
3. When removing a print cartridge from the
storage container, be sure that the cartridge
clip is disengaged, then lift the print cartridge
out of the storage container.
6
US English 400 manual 05.06.1997 04.44 pm Page 6