Miracle steamer, Installation (continued) – Antunes, AJ MS-150/155 User Manual
Page 8
![background image](/manuals/39896/8/background.png)
MIRACLE STEAMER
8
P/N 1010699 Rev. M 12/06
CAUTION
All electrical connections must be in accordance
with local electrical codes and any other appli-
cable codes.
PLUMBING
NOTE: Miracle Steamer models are designed to
use cold tap water. Distilled water may be used
to reduce calcium/mineral deposit build-up and
reduce maintenance costs.
CAUTION
This equipment is to be installed to comply with
the basic plumbing code of the Building Officials
and Code Administrators, Inc. (BOCA) and the
Food Service Sanitation Manual of the Food and
Drug Administration (FDA).
READ
Y
Figure 2. Filling Water Tank–MS-150/155
Filter
Sliding Cover
READY
ADD
WATER
Figure 3. Filling Water Tank–MS-355
Indicator Light (Low water)
Model MS-150/155 & MS-355
The MS-150/155 & MS-355 models have a self-con-
tained water tank. To fill the self-contained water tank:
1.
MS-150/155: Open the sliding tank cover on top
of the unit (Figure 2).
NOTE: Make sure filter inside tank is installed
properly.
MS-355: Open the sliding tank drawer on the side
of the unit (Figure 3).
2. Pour in
cold tap water. The tank will hold
approximately 3 quarts (2.81 liters).
3. Close the sliding tank drawer.
INSTALLATION (continued)
Tank
CAUTION
Be sure to follow all safeguards and precautions
in the Important Safety Instructions section of this
manual.
Tank
CAUTION
Do NOT overfill the unit water tank. Fill the tank to
90% full ONLY.