HP ProLiant DL385 G2 Server - Manual (Page 51)

Hardware options installation 51
3. Slide the power supply into the power supply bay.
4. Connect the power cord to the power supply.
5. Route the power cord through the power cord anchor or cable management arm.
6. Reposition the cable management arm into the operating position.
7. Connect the power cord to the power source.
8. Be sure that the power supply LED is green (" Rear panel LEDs and buttons " on page 11 ).
9. Be sure that the front panel external health LED is green (" Front panel LEDs and buttons " on page 8 ).
DC power supply option