HP ProLiant DL385 G2 Server - Manual (Page 49)

Hardware options installation 49
3. Install the hard drive.
4. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations (" SAS and
SATA hard drive LED combinations " on page 18 ).
Removing a hot-plug SAS hard drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
1. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations (" SAS and
SATA hard drive LED combinations " on page 18 ).
2. Back up all server data on the hard drive.
3. Remove the hard drive.