HP Photosmart Pro B9180 Photo Printer - Manual (Page 9)

Paper trays
1 Main tray: Place a stack of photo paper, plain paper, or other non-rigid media in this tray for
printing. Load the media in portrait orientation and with the side to be printed facing
down. Squeeze the main tray release to lengthen or shorten the main tray, depending on the
size of paper you are loading.
2 Output tray: Print jobs come out here. For easier access to the main tray, remove this tray
by pulling it out towards you.
3 Specialty media tray (open): Insert a single sheet of rigid or thick media, such as card stock,
in this tray. Load the media with the side to be printed facing up.
4 Main tray release: Squeeze this release and pull it towards you to extend or retract the main
tray extension, or to remove the tray from the printer.
5 Paper catch: Flip up to keep print jobs from falling off the output tray extension.
6 Output tray extension: Pull it towards you to extend the output tray to catch the printed paper
as it is ejected from the printer.
Chapter 1
6 HP Photosmart Pro B9100 series printer