HP ProBook 6465b Notebook-PC - Manual (Page 62)

To install a hard drive in the upgrade bay:
1. Insert the hard drive (1) into the upgrade bay, and then tighten the upgrade bay screw (2).
2. Replace the hard drive screws.
3. Replace the bottom cover (see Replacing the bottom cover on page 47 ).
4. Insert the battery (see Inserting or removing the battery on page 39 ).
5. Turn the computer right-side up, and then reconnect AC power and external devices to the
computer.
6. Turn on the computer.
52 Chapter 7 Drives