HP OmniBook 3000 Notebook PC - Manual (Page 9)

Using OmniBook Plug-In Modules
Using the Floppy Drive
1-9
Using the Floppy Drive
You can install the floppy drive in the plug-in module bay or attach it externally to
the parallel port.
This section describes how to
♦ Install the floppy disk drive externally.
♦ Insert or eject a floppy disk.
To install the floppy drive externally
•
Connect the external floppy-drive cable to the OmniBook’s parallel port.
If you remove the plug-in floppy drive and use it externally, you can use the
module bay for another plug-in module, such as a CD-ROM drive, Zip drive, or
secondary battery.