beautypg.com

Replacing a plug-in accessory module – HP OmniBook 3000 Notebook PC User Manual

Page 7

background image

Using OmniBook Plug-In Modules

Replacing a Plug-In Accessory Module

1-7

Replacing a Plug-In Accessory Module

Important

If you are inserting or removing a CD-ROM or Zip drive, turn the OmniBook off
before removing or inserting the plug-in module (shut down the computer using the
Start menu or press the power button for 4 or more seconds). This is not necessary if
you are inserting or removing a floppy disk drive or secondary battery.

To replace a plug-in module

1. From the Start menu, shut down Windows 95 (for CD-ROM drive or Zip drive

only).

2. Slide the safety latch for the plug-in slot into its recess.

3. Slide and hold the release latch, then pull out the module, as shown.

Safety
latch

Release
latch