HP OmniBook 3000 Notebook PC - Manual (Page 10)

Using OmniBook Plug-In Modules
Using the Floppy Drive
1-10
To insert or eject a floppy disk
C A U T I O N Do not insert or remove a floppy disk while the OmniBook is actively reading
or writing data. Otherwise, you could lose data or the OmniBook could stop
responding.
1. Hold the disk with its face up, then slide it into the floppy drive slot until it
clicks into place.
2. To remove the floppy disk, press the eject button on the front of the drive.