Expansion board options – HP ProLiant DL388e Gen8 Server User Manual
Page 70

Hardware options installation 70
Store any unused fans as spares.
17.
Install the air baffle (on page
18.
Install the access panel (on page
19.
Install the server into the rack ("
Installing the server into the rack
" on page
20.
Expansion board options
The server has both full-height and low-profile expansion slots for controller option installation ("
" on page
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website
CAUTION:
To prevent damage to the server or expansion boards, power down the server, and
disconnect all power cords before removing or installing the PCI riser cage.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all expansion slots have either an expansion slot cover or an expansion board installed.
To install the component:
1.
Power down the server (on page
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
o
Remove the server from the rack (on page
4.
Remove the access panel (on page
5.
Remove the PCI riser cage ("
" on page