Erasing array configurations – HP Intelligent Provisioning User Manual
Page 22
REM ----
REBOOTREQUIRED:
System\reboot PXE
HWNOTFOUND:
End:
For more information about Online ROM Flash Smart Components, see the HP Online ROM Flash
User Guide on the HP Software and Driver Downloads website at
).
Erasing array configurations
Before beginning the deployment process, you might want to erase the current array configuration.
The commands in the following examples can be run as part of a script or alone.
To erase the array configuration:
1.
Use the Microsoft DiskPart utility to clear the partition table:
a.
Create a script file called ErasePart.txt that contains the following commands:
REM This file instructs Diskpart.exe to select the first disk as
REM target, then clean the target.
rescan
select disk=0
clean
b.
Run the Microsoft DiskPart utility to clear the partition table:
diskpart /s .\ErasePart.txt
2.
Use ACU to erase the array configurations:
hpacuscripting -i erase.ini
The erase.ini file is provided in the Scripting Toolkit sample files.
22
Advanced topics