Binding margin is in the wrong place, Colors look faded, Dimensions when attached to printer – HP Deskjet 6540 Color Inkjet Printer User Manual

Page 174: Duplexing specifications, Or the

Binding margin is in the wrong place

You might have chosen an incorrect paper orientation.

1. Open the

dialog box.

2. Select the Layout panel.
3. Verify that the correct binding has been selected:

• The Book button is selected for binding along the side.
• The Tablet button is selected for binding along the top.

Only one side of the page prints when the two-sided printing option is

enabled

Verify the following:

• The photo paper is not curled, if you are printing on two-sided photo paper.

Photo paper should be flat before printing. See

for more information.

the duplexer.

• The paper type that is selected in the Paper Type/Quality panel is supported

If the paper type or size is not supported by the duplexer, you can print the

document by using the

Colors look faded

If the colors look faded, try printing the two-sided document by using the

16.3.6 Auto Two-Sided Print Accessory with Small Paper Tray

specifications

Dimensions when attached to printer

219.3 mm (8.63 in) tall x 320.5 mm (12.62 in) wide x 142.1 mm (5.6 in) deep

Duplexing specifications

For duplexing specifications, including skew, media weight, and media sizes for

paper fed into the printer through the printer In tray, see the

HP Deskjet 6500 series printers User's Guide

174