Write problems – HP dvd1270e DVD-Writer User Manual
Page 18

ENGLISH
Write Problems
Symptom
Possible Cause
Solution
Authoring software used
does not support your DVD
writer
Use the bundled software provided with
the DVD writer.
When other software is used, contact the
software supplier (or check the
appropriate website) to ensure that it
supports this DVD writer.
Disc inserted upside down
Reinsert the disc label side up.
Insufficient hard disk
capacity
Ensure that 1.2 to 2 times the capacity of
the write data is available on hard disk.
(Required capacity may vary according to
write method.)
No power
Ensure that the power cord is connected
securely (at all connections).
Cannot write to disc
IDE cable not properly
connected
Ensure that the IDE cable and connectors
are not damaged (check the pins
carefully), and both sides are connected.
Defective or damaged disc
Always use high-quality media.
Always handle discs with care and keep
them clean. Deep scratches, fingerprints,
or other contaminants on a disc’s surface
can cause errors.
Writing errors occur
Insufficient hard disk
capacity
Ensure that 1.2 to 2 times the capacity of
the write data is available on hard disk.
(Required capacity may vary according to
write method.)
DVD/CD media not
compatible with high speed
Use media rated for the highest speed
your drive can write.
Defective or damaged disc
Always use high-quality media.
Always handle discs with care and keep
them clean. Deep scratches, fingerprints,
or other contaminants on a disc’s surface
can slow down write speed.
Cannot write at highest
speed