HP dvd1270e DVD-Writer - Manual (Page 12)

ENGLISH
Insert and remove a disc
To insert a disc:
(1) While the DVD writer is powered up, push the Eject button on the front
panel to eject the tray.
(2)
Place the disc, label side up, onto the tray. Make sure the disc is seated
properly into the bay on the tray.
Figure: Insert a disc
Note: Please be sure no foreign object or liquid substance gets onto the tray
or into the drive.
(3) Press the Eject button again to retract the tray.
To remove a disc:
(1) While the DVD writer is powered up, push the Eject button on the
front panel to eject the tray.
(2) Carefully lift disc off the tray.
(3) Press the Eject button again to retract the tray
Tips on handling the drive or the disc:
Always handle disc by the edge, avoid contacting the data surface.
Do not place disc face down on hard or rough surfaces
Never use damaged or cracked disc.
Always use eject button to operate the tray.
Do NOT force the tray in or out