HP ProBook 6445b Notebook-PC - Manual (Page 161)

Select To do this
● Enable/disable Wake on USB (enabled by default).
● Enable/disable Num lock state at boot (disabled by
default).
● Enable/disable TXT (Intel® Trusted Execution
Technology) (select models only; disabled by default).
Built-In Device Options ● Enable/disable the wireless button state (enabled by
default).
● Enable/disable embedded WLAN device radio (select
models only; enabled by default).
● Enable/disable the Network Interface Controller (LAN)
(enabled by default).
● Enable/disable the embedded Bluetooth® device radio
(enabled by default).
● Enable/disable LAN/WLAN switching (disabled by
default).
● Enable/disable LAN Power Save (select models only).
When enabled, saves power by turning off the LAN when
not in use (enabled by default).
● Set the wake on LAN state. Options include the
following:
◦ Disabled
◦ Boot to Network
◦ Follow Boot Order
● Enable/disable the Notebook Upgrade Bay device
(enabled by default).
● Enable/disable the Power Monitor Circuit (enabled by
default).
● Enable/disable the audio devices (enabled by default).
● Enable/disable the fingerprint device (enabled by
default).
● Enable/disable a modem device (enabled by default).
● Enable/disable the microphone (enabled by default).
● Enable/disable the internal speakers (enabled by
default).
Port Options (all are enabled by default) NOTE: All port options are enabled by default.
● Enable/disable the serial port.
● Enable/disable the parallel port.
● Enable/disable the flash media reader.
● Enable/disable the USB port.
Computer Setup menus 151