HP DesignJet 500 - Manual (Page 200)

Media & Ink Introduction Front-Panel Other Index Solutions
Printer
Options
Page Format Image Appearance
Page Size in the Front-
Panel
Print Management Printer Configuration
Non-PostScript Files
The Size option lets you select the page size of your print. The options are described in the following table. If
you need to adjust the page size from the front-panel, do so before sending the file from your computer. The
printer determines the size of a print at the time it is received from your application. Settings will be overridden
by your driver or application.
Page format Size= Comments
Inked Area The printed page size is the Inked area plus margins.
NOTE: This option is not available for cut sheet media.
Software The printer uses the page size from printer software. If there
is no defined page size, the printed page size is the inked
area plus margins.
Best a ISO A, ISO A0/A1/A2/A3/A4 The printed page size is exactly the size you specify.
Best a ANSI, ANSI E/D/C/B/A
a. The printer chooses the smallest page size from the corresponding discrete options
that will hold the inked area of the print. For example, if Best ISO A is selected and the
inked area of the print is between A3 and A4,the printer chooses A3 as the page size.
Best a JIS B, JIS B1/B2/B3/B4
Best a ARCH, ARCH E1/E/D/C/B/A
Oversize A1/A2
Extra Wide 1M x 1.4M, 42 in x 59in