The printer’s ink cartridges
are working correctly. You
should only remove them if
you are printing a large
image unattended, and
there is not sufficient ink
remaining to finish the
image.

For the Cartridge removal
procedure see

Ink Cartridge

Removal

Warning! Tubes System
has reached its END OF
LIFE. Contact HP
Representative. Replace
Tubes System.

The internal ink system
inside your printer has
reached its end of life.

Make a note of this display and
Contact HP Support
describing the situation.

WARNING!!! You are
going to reset the
WebAccess Passwd.

You have a security setting
for the WebAccess tool.
This is an optional setting. If
you continue with the
procedure, the password to
gain access to WebAccess
will be re-set.

This setting is because you
have forgotten, or do not know
the password for entry into

HP Designjet WebAccess

You need to cut this
media manually

You have media loaded
which the cutter cannot cut
because it is too thick or
strong.

Use a knife or scissors to cut
the media.

Status

Description

Procedure