HP DesignJet 500 - Manual (Page 162)

Media & Ink Introduction Front-Panel Other Index Solutions
The Front-Panel Setup Menus Consumable Menus Internal Prints Navigation
Message
Descriptions
Printer
Options
Replace cleaner The printer is designed so
that when you replace a
printhead you must also
replace the printhead
cleaner. See
Component
Identification for the location
See Printhead Cleaner
Removal for an animation on
how to perform this procedure.
Replace ink cartridge This is an ink cartridge
removal instruction. For more an animation
showing the Cartridge removal
procedure see
Ink Cartridge
Removal
Reset Web Passwd When this is displayed you
are resetting your password
for access to the
WebAccess tool. See
HP Designjet WebAccess .
Setup The setup message is
displayed when new tubes
have been installed into the
printer and you have
installed the correct setup
printheads When the setting up of the
tube system is complete, the
front-panel will display a
message asking you to
remove them and replace with
‘normal printheads’.
Status Description Procedure