Other internal prints, Configuration print, Printer usage information – HP DesignJet 500 User Manual
Page 143: Print quality image, Service configuration, Hp-gl/2 palette, Samples, Hp-gl/2 config, Service config, Demos
Other Internal Prints
There are several internal prints available in the printer.
The prints are listed below:
Configuration Print
The Configuration print shows the current settings for
all the printer’s features. See
Printer Usage Information
The Printer Usage Information print shows the status of
the printer’s usage counters. This information includes
the total number of prints, number of prints by media
type, number of prints per print mode, and total amount
of ink used per color. The counts in this report are
estimates. This information is also available in the front-
panel in a shortened version. Go to the Setup menu/
Utilities/Printer Usage/View Usage.
Print Quality Image
The Print Quality Print can be used to help diagnose
whether the printer has image quality problems, and if
problems exist, help determine the cause of
image quality problems see
Service Configuration
The Service Configuration print provides information
needed for the service engineer, such as the internal
current configuration, operating conditions
(temperature and humidity), ink levels, and other
statistics about printer usage.
HP-GL/2 Palette
The HP-GL/2 Palette print shows the color or grayscale
definitions in the currently-selected color palette. See
Samples
These are prints showing the capabilities of the printer.