HP ProLiant DL360 G6 Server - Manual (Page 47)

Hardware options installation 47
Remove the component as indicated.
Removing a hot-plug SAS hard drive
CAUTION: For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations (" SAS and
SATA hard drive LED combinations " on page 16 ).
2. Back up all server data on the hard drive.
3. Remove the hard drive.
Installing a SAS hard drive
1. Remove the hard drive blank (" Removing hard drive blanks " on page 46 ).