HP ProLiant DL360 G6 Server - Manual (Page 46)

Hardware options installation 46
Removing hard drive blanks
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
Remove the component as indicated.
Removing hard drive bezel blanks
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To remove the component:
1. Remove hard drives 1 and 2 (" Removing a hot-plug SAS hard drive " on page 47 ).
2. Remove the hard drive bezel blank.
Removing the dual hard drive bezel blank
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.